Painting a Door

When painting doors, use the "inside-out" technique. Doors, either flush or panel, can be painted quickly with a roller and brush. Brush in all thedifficult surfaces first, then cover as much as you canwith the roller. Use the brush immediately after using a roller to give the paint a grain that will match the wood, across and up and down. It may be best to remove door from hinges and lay it down on saw horses or table. Paint can be applied quicker and thicker with-out the danger of paint sagging. Allow the painted side to dry thoroughly before turning it over to paint other side. Use padding to protect the painted surface.

Exterior Preparation

Frist, cover all tree, bushes and surfaces you want to protect. Second, make all repairs in surface. Scape or sand any peeling paint or surface area. Patch the area after removing peeling paint and then sand. Sweep up dust from area and apply caulking to gaps. Use wood filler or patching material for wholes. Allow to dry and sand until flush with surface. Sand any area that has a gloss to get adhesion. Clean all mildew and stains with a cleaner using a pump sprayer and sponge. Wash all surface with a power washer or water hose (top to bottom and side to side) and allow to dry.  

Monthly Special

The Holiday's are around the corner! Let Heavenly Hands Painting Co. Brighten your home this season, with monthly specials that you can stuff in your stocking!

Wallboard Saw

Wallboard saw is similar to a compass saw, but it is designed for gypsum board also claaed, drywall and sheetrock. The sharpened point is designed to make a starting cut for pipes, electric outlet, light switches etc.

Painter Tape

Painter's tape is great product for protecting those area and things you do not want painted. Before apply paint to a surface, make sure to apply tape to all that needs protection like: baseboards, trim, light switches, electric outlets, alarm controls etc. Getting paint off these surfaces can be a pain and only makes your job harder. When applying painters tape to a surface apply even pressure to the ends to give tape a secure lock.This helps prevent paint from leaking behind the tape.