Happy Holiday!!!!

HAPPY NEW YEARS

HAPPY HOLIDAY'S

                      Merry Christmas!

                         From: FEATHER IT OUT!

Wrought Iron

 

For rusting and peeling wrought iron, wire brush and scape throroghly to remve all loose and flaking material. Sand all spots as close as possible to bare metal, feathering the edges of the old paint. Spot prime with a rust-inhibiting metal primer-an alkyd- or oil-base primer, then paint with an oil base top coat. Oil-base is more effective than Latex paint because it will not leave small pinholes for water to seep through and cause further rust.

Performance Video

Removing Pop-Corn Ceiling

If your Inexperienced or a Do-It-Yourself er and want to remove Pop-Corn Texture from your ceiling. Simply get a garden sprayer, a 6' ladder or two 4' ladders and a plank (much faster). Also a 6"- 8" scraper or putty knife, plastic drop cloth (Caution slippery when wet). To avoid slipping place an old bed sheet over plastic drop cloth. You will need a hat, eye protection and a face mask. Ok, now that you got all your equipment, next lay down drop cloth and set-up ladder. Fill up the garden sprayer with warm to hot water. Then spray textured ceiling in a 4x5 section, wait a few seconds to let the texture soak up the water and then scrap area. Just repeat steps in sequence.