Wallboard Saw

Wallboard saw is similar to a compass saw, but it is designed for gypsum board also claaed, drywall and sheetrock. The sharpened point is designed to make a starting cut for pipes, electric outlet, light switches etc.

Painter Tape

Painter's tape is great product for protecting those area and things you do not want painted. Before apply paint to a surface, make sure to apply tape to all that needs protection like: baseboards, trim, light switches, electric outlets, alarm controls etc. Getting paint off these surfaces can be a pain and only makes your job harder. When applying painters tape to a surface apply even pressure to the ends to give tape a secure lock.This helps prevent paint from leaking behind the tape.

The Advantages Of A Stabilizer Bar

A stabilizer provides a broad base for the top of an extension ladder so that it is less likely to twist away from a wall. Stabilizers come in a variety of materials and designs. The one shown here is made of a square aluminum tubing curved on each end. It's wide enough to bridge across a single window. It lifts the ladder away from the window and away from a wall for easier access to the roof. The stabilizer is fastened to the rails of the ladder by clamps and wing nuts. The stabilizer bar gives protection to a wall not only by keeping the ladder rails from scratching the wall. But with its nonskid pads at the ends of the stabilizer bar, it prevents slipping of the ladder as well.

Roller Grid and a 5 Gallon Bucket

A roller grid is great for loading paint on your roller. It helps to give you a even load of paint to your roller. You can place it in a 5 gallon bucket or in a paint roller pan. Use a 5 gallon bucket  when you are using more then one gallon of paint to get an even mix of your choice of paint. If any paint is left, simple place a top on the bucket and store it away.

Basic Drywall Tools

Mud pan is great for holding compound when on ladders or high places. You can clean your putty knife by scraping your putty knife on the top side of the mud plan. Use a 6in. knife for your first coat of compound and then apply tape. For your second coat, use a 8in. knife and then a 10in knife for your third and final coat. If adding a forth and final coat, you can use a 12in. knife.